Supercharge your Magento with a Varnish cluster

Supercharge your Magento with a Varnish cluster

What is a varnish cluster?

A varnish cluster is a set of varnish nodes, each in a different geographical location, in front of the same Magento backend.

As shown a Magento hosted in the US East region can serve varnish nodes from across the world. Access to the website from each region is directed towards the nearest varnish, benefiting from lower latency and faster page loads.

If you serve customers in different regions – internationally or across the USA, your store can benefit from a varnish cluster.

Varnish and Magento performance

Magento 2 was architected to work with Varnish for improved performance. A typical webpage – category listing or product detail page – when returned from a cached varnish page (called a HIT in varnish) typically has a TTFB of a few milliseconds. An uncached page (also called a MISS in varnish) results in TTFB of a few seconds. Optimizing a MISS is very crucial, but we will not cover that in this article. We believe varnish is one portion of optimizing your website.

What is Network Latency

Latency is the time it takes for a network packet to go from your computer to the server with a request and come back with a response – assuming the response from the server was available immediately. When a page scores a HIT in varnish, the response is almost immediate from the server. Any  Time To First Byte (TTFB) recorded on the browser can be attributed to network latency.

If you market your website to many regions around the world, and you host varnish in a single location, your visitors may be faced with higher latency. When latency of access is in a few hundred milliseconds, it becomes the bottleneck and needs optimization.

The below information from https://wondernetwork.com/pings/ gives an idea of expected latencies. To read the table use the row header as source and column header as destination. So, a ping latency from Los Angeles to Mumbai would be 267 msec.

What is the cause of latency?

Core latency is a function of distance – even light will take ~40msec to travel 13,000 km – the distance from New York to Mumbai. A network packet travels through wires at that speed, and network wires are much longer than a straight line. Moreover, a response packet has to travel all the way back.

Latency is also caused as traffic goes through network equipment. The number of switches / servers a packet has to go through depends on the network and service providers – yours as well as at the server you are connecting to.

A varnish cluster architecture

Using a GeoIP based DNS service such as AWS Route53 a users request for a domain is redirected to one of several IPs. The Magento backend is in the “default” region – where maximum traffic is expected. A varnish in the regions desired – shown US East and Europe below.

Geo-IP based DNS

A geoip based dns router such as AWS route53 can help direct traffic to the nearest varnish node based on the guessing the country the IP requesting name resolution is coming from. So users on a browser say in Australia would be directed to be served from the varnish node in Australia and one from the west states of California would be directed to the varnish there.

Since IP to region or country can never be so accurate, it should be possible for all varnish nodes to serve customers from any region. Specifically, a language or currency switcher should be available on the website.

Magento 2 supports multiple varnish nodes out of the box

An important feature in using a cache in production is its need to automatically and quickly clear contents on demand from the user and application. For example, when a product goes out of stock, the corresponding page should display the out of stock label. Magento uses a tag-based system to flush appropriate content from the cache. Magento allows setting up multiple varnish hosts and a tag-based cache clear is sent to all the hosts.

bin/magento setup:config:set --http-cache-hosts=<varnish internal ip>:6081,<varnish internal ip 2>:6081

Refer : https://devdocs.magento.com/guides/v2.4/config-guide/varnish/use-multiple-varnish-cache.html



Challenges in a varnish cluster

A varnish cluster is more complex to manage

Ensure the varnish vcl files, front end security configuration (WAF, rate limiting, etc) is managed and kept in sync on all edge nodes.

Managing includes monitoring to ensure none of the servers go down. Now, your site can be down in a specific region for example. Typical monitoring tools such as Pingdom would not work. A purposeful monitoring solution is needed.

A varnish cluster costs for additional servers

Since these would be frontend servers, the amount of RAM and their network speed requirement would depend on what traffic they get.

Number of varnish nodes

Increasing the number of nodes in a varnish cluster does not always help in improving site speed. That is because each varnish node has a different hit ratio. A lower hit ratio leads to more users getting the latency and performance penalties combined – due to a varnish MISS. Traffic pattern and latency have to be taken into account to decide on how many nodes to use in a cluster.

Difficult to warm the cache

Given the distributed nature of the cache, warming each cache independently takes more resources on the server side as well as some changes to the way a cache warmer works.

luroConnect : A modern cloud hosting platform

Schedule a call of a free evaluation and demo!

  • Is horizontal scaling manually or with autoscale right for you?
  • Evaluate if a varnish cluster will help your website performance
  • Show managed dev, staging and production environments
  • How we measure application performance every minute with alerts for a slowdown
  • Can your hosting costs be optimized?
  • How improved hosting can lead to better ROI!

On Magento Cloud? We have special offers if you switch your enterprise license to luroConnect managed AWS cloud.


Magento Cloud and Fastly

It is important to discuss the Magento 2 cloud decision to use Fastly as a frontend.

 

Magento 2 cloud pro version architecture is given below. (Reference : https://devdocs.magento.com/cloud/architecture/pro-architecture.html)

The architecture uses Fastly as a Full Page Cache. Varnish is not installed on the Instances in AWS.

Fastly is a CDN that uses varnish. With the Magento 2 Cloud integration, a custom plugin is used on Magento along with a custom vcl file that runs on Fastly.

Fastly has many “POP” locations. As per fastly documentation, there are 20 POP locations in North America, https://www.fastly.com/network-map

mostly in the USA. Each has its own varnish cache. When a page is not in a POP, it fetches content from the origin. A single page may have to be rendered 20 times for each POP location in North America.

Drawbacks of this architecture from a varnish cluster perspective

  • More POPs do not lead to better experience as a higher percentage of MISS on varnish results in a worse experience for more users.
  • As POPs increase the load on Magento infrastructure increases.
  • It is not possible to use a cache warmer to warm the Fastly cache.

What next?

An ideal situation would be a layered varnish configuration – each “satellite” varnish node serving a local user, caching a subset of the “main” varnish node, reducing the penalty of a varnish MISS.

Share your thoughts here or on social media.


Share this post